Anterwell Technology Ltd.

Anterwell Technology Ltd. Large Original stock of IC Electronics Components, Transistors, Diodes etc. High Quality, Reasonable Price, Fast Delivery.

Manufacturer from China
Site Member
8 Years
Home / Products / Mosfet Power Module /

DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module IC

DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module IC

Ask Latest Price
Brand Name :DALLAS
Model Number :DS1230Y-150+
Certification :Original Factory Pack
Place of Origin :Philippines
MOQ :5pcs
Price :Negotiation
Payment Terms :T/T, Western Union,PayPal
Supply Ability :600PCS
Delivery Time :1 Day
Packaging Details :please contact me for details
FEATURES :10 years minimum data retention in the absence of external power
FEATURES2 :Data is automatically protected during power loss
FEATURES3 : Replaces 32k x 8 volatile static RAM, EEPROM or Flash memory
Applications :Unlimited write cycles
Typical Applications 1 :Low-power CMOS
Typical Applications 2 :Read and write access times as fast as 70 ns
Contact Now

Add to Cart

Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
View Product Description

DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module IC

FEATURES

10 years minimum data retention in the absence of external power

Data is automatically protected during power loss

 Replaces 32k x 8 volatile static RAM, EEPROM or Flash memory 

Unlimited write cycles 

Low-power CMOS 

Read and write access times as fast as 70 ns

 Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time 

Full ±10% VCC operating range (DS1230Y) 

Optional ±5% VCC operating range (DS1230AB) 

Optional industrial temperature range of -40°C to +85°C, designated IND 

JEDEC standard 28-pin DIP package

 New PowerCap Module (PCM) package

- Directly surface-mountable module

- Replaceable snap

-on PowerCap provides lithium backup battery

- Standardized pinout for all nonvolatile SRAM products

- Detachment feature on PowerCap allows easy removal using a regular screwdriver

DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module ICPIN DESCRIPTION

A0 - A14 - Address Inputs

DQ0 - DQ7 - Data In/Data Out

CE - Chip Enable

WE - Write Enable

OE - Output Enable

VCC - Power (+5V)

GND - Ground

NC - No Connect

DESCRIPTION

The DS1230 256k Nonvolatile SRAMs are 262,144-bit, fully static, nonvolatile SRAMs organized as 32,768 words by 8 bits.

Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition.

When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption.

DIP-package DS1230 devices can be used in place of existing 32k x 8 static RAMs directly conforming to the popular bytewide 28-pin DIP standard.

The DIP devices also match the pinout of 28256 EEPROMs, allowing direct substitution while enhancing performance. DS1230 devices in the Low Profile Module package are specifically designed for surface-mount applications.

There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.

READ MODE

The DS1230 devices execute a read cycle whenever WE (Write Enable) is inactive (high) and CE (Chip Enable) and OE (Output Enable) are active (low).

The unique address specified by the 15 address inputs (A0 - A14) defines which of the 32,768 bytes of data is to be accessed. Valid data will be available to the eight data output drivers within tACC (Access Time) after the last address input signal is stable, providing that CE and OE (Output Enable) access times are also satisfied.

If OE and CE access times are not satisfied, then data access must be measured from the later-occurring signal (CE or OE ) and the limiting parameter is either tCO for CE or tOE for OE rather than address access.

WRITE MODE

The DS1230 devices execute a write cycle whenever the WE and CE signals are active (low) after address inputs are stable. The later-occurring falling edge of CE or WE will determine the start of the write cycle.

The write cycle is terminated by the earlier rising edge of CE or WE . All address inputs must be kept valid throughout the write cycle.

WE must return to the high state for a minimum recovery time (tWR) before another cycle can be initiated. The OE control signal should be kept inactive (high) during write cycles to avoid bus contention.

However, if the output drivers are enabled ( CE and OE active) then WE will disable the outputs in tODW from its falling edge.

PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
DS1230AB Power Supply Voltage VCC 4.75 5.0 5.25 V /
DS1230Y Power Supply Voltage VCC 4.5 5.0 5.5 V
Logic 1 VIH 2.2 VCC V
Logic 0 VIL 0.0 0.8 V
China DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module IC for sale

DS1230Y-150+ 256k Nonvolatile SRAM SS Replaces RAM Module IC

Inquiry Cart 0