24AA1025-I/SM Programmable IC Chips 1024K I2C™ CMOS Serial EEPROM

24AA1025/24LC1025/24FC1025

1024K I²C™ CMOS Serial EEPROM

Features:

• Low-Power CMOS Technology:

- Read current 450 μA, maximum

- Standby current 5 μA, maximum

• 2-Wire Serial Interface, I²C™ Compatible

• Cascadable up to Four Devices

• Schmitt Trigger Inputs for Noise Suppression

• Output Slope Control to Eliminate Ground Bounce

• 100 kHz and 400 kHz Clock Compatibility

• 1 MHz Clock for FC Versions

• Page Write Time 3 ms, typical

• Self-Timed Erase/Write Cycle

• 128-Byte Page Write Buffer

• Hardware Write-Protect

• ESD Protection >400V

• More than 1 Million Erase/Write Cycles

• Data Retention >200 Years

• Factory Programming Available

• Packages include 8-lead PDIP, SOIJ and SOIC

• Pb-Free and RoHS Compliant

• Temperature Ranges:

- Industrial (I): -40℃ to +85℃

- Automotive (E): -40℃ to +125℃

Description:

The Microchip Technology Inc. 24AA1025/24LC1025/ 24FC1025 (24XX1025*) is a 128K x 8 (1024K bit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.7V to 5.5V). It has been developed for advanced, low-power applications such as personal communications or data acquisition. This device has both byte write and page write capability of up to 128 bytes of data.

This device is capable of both random and sequential reads. Reads may be sequential within address boundaries 0000h to FFFFh and 10000h to 1FFFFh. Functional address lines allow up to four devices on the same data bus. This allows for up to 4 Mbits total system EEPROM memory. This device is available in the standard 8-pin PDIP, SOIC and SOIJ packages.

Absolute Maximum Ratings(†)

V_CC.................................................................................................................................6.5V

All inputs and outputs w.r.t. V_SS ............................................................. -0.6V to VCC +1.0V

Storage temperature ....................................................................................-65°C to +150°C

Ambient temperature with power applied.......................................................-40°C to +125°C

ESD protection on all pins..............................................................................................≥4 kV

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.

Package Type

Block Diagram

Stock Offer (Hot Sell)